CentrEd+

CentrEd+ Version 0.7.9.001

Overview Updates (3) Reviews (4) History Discussion
I have zero idea what modifications have you done to your asset files and how. So This may be due to multiple things Sometimes people tend to mix old files with new clients and doesn't update file lengths properly. Or do all sorts of different copy/paste asset actions and in the end corrupt files. Get yourself clean installation of the uo client and start from there maybe? :)
 
AsYlum said:
That name comes from tiledata so something is wrong with your tiledata probably. Do you have mul and uop files mixed in your client folder? Maybe you have different contents of those art mul/uop files and depending on application it picks up different files?
Click to expand...
uop only Animations
1705589919315.png
 
Are those art files from other client what modifications have you done to original client assets? Something went wrong and you just have to revert to previous backup and start again :)
 
AsYlum said:
Are those art files from other client what modifications have you done to original client assets? Something went wrong and you just have to revert to previous backup and start again :)
Click to expand...
This is a client of a long-closed shard and I decided to look into it
Apparently I'll have to transfer all the graphics from this client to mine :)
 
Last edited:
AsYlum said:
looks like wrong flag value for centred+ configration. Which client files are you using? And what have you set in your centred cofnig?
Click to expand...
client of uo.com
conf: 
<?xml version="1.0"?>
<CEDConfig Version="6">
  <Language>..\Language\English.ini</Language>
  <Port>2597</Port>
  <Map>
    <Map>D:/dreams/map0.mul</Map>
    <StaIdx>D:/dreams/staidx0.mul</StaIdx>
    <Statics>D:/dreams/statics0.mul</Statics>
    <Width>896</Width>
    <Height>512</Height>
    <Prefix>0</Prefix>
    <Format>0х0010</Format>
  </Map>
  <Tiledata>D:/dreams/tiledata.mul</Tiledata>
  <Radarcol>D:/dreams/radarcol.mul</Radarcol>
  <Accounts>
    <Account>
      <Name>tj</Name>
      <PasswordHash>5da01edba</PasswordHash>
      <AccessLevel>255</AccessLevel>
      <LastPos x="1423" y="1691"/>
      <Regions/>
    </Account>
  </Accounts>
  <Regions/>
</CEDConfig>
 
Try format 0x18 I never remember which is right :) but I think this should be fine for files from one of the latest clients and after 7.0.35.x

This really depends on the client version. So if you have older client you may need to experiment with 0xC, 0x18, 0x0 or other values. If those are non standard files then it'd be nice to know from which exact client version files were taken and if all are from the same file. You don't use uop?
 
AsYlum said:
Try format 0x18 I never remember which is right :) but I think this should be fine for files from one of the latest clients and after 7.0.35.x

This really depends on the client version. So if you have older client you may need to experiment with 0xC, 0x18, 0x0 or other values. If those are non standard files then it'd be nice to know from which exact client version files were taken and if all are from the same file. You don't use uop?
Click to expand...
[02:17:17] Language loaded: English
[02:17:17] Config file loaded: "cedserver.xml"
[02:17:17] Initialization starting
[02:17:17] Loading: Map, Statics, StaIdx, Tiledata
[02:17:17] Initialization complete
[02:17:17] Bad mul files. Check map and file sizes.
[02:17:17] Shuting down...done


latest client version 7.0.98.1
 
loveslips said:
client of uo.com
conf: 
<?xml version="1.0"?>
<CEDConfig Version="6">
  <Language>..\Language\English.ini</Language>
  <Port>2597</Port>
  <Map>
    <Map>D:/dreams/map0.mul</Map>
    <StaIdx>D:/dreams/staidx0.mul</StaIdx>
    <Statics>D:/dreams/statics0.mul</Statics>
    <Width>896</Width>
    <Height>512</Height>
    <Prefix>0</Prefix>
    <Format>0х0010</Format>
  </Map>
  <Tiledata>D:/dreams/tiledata.mul</Tiledata>
  <Radarcol>D:/dreams/radarcol.mul</Radarcol>
  <Accounts>
    <Account>
      <Name>tj</Name>
      <PasswordHash>5da01edba</PasswordHash>
      <AccessLevel>255</AccessLevel>
      <LastPos x="1423" y="1691"/>
      <Regions/>
    </Account>
  </Accounts>
  <Regions/>
</CEDConfig>
Click to expand...
1710837392005.png
 
loveslips said:
[02:17:17] Language loaded: English
[02:17:17] Config file loaded: "cedserver.xml"
[02:17:17] Initialization starting
[02:17:17] Loading: Map, Statics, StaIdx, Tiledata
[02:17:17] Initialization complete
[02:17:17] Bad mul files. Check map and file sizes.
[02:17:17] Shuting down...done


latest client version 7.0.98.1
Click to expand...
Use uop instead of mul for map and it should work with 0x18. 0x1C also works.
 
Does anyone perhaps know how to get this edited map into your servUO server when logging in for the first time?
 
Apologies - I am quite noob. What I mean is.

I have now edited map0LegacyMUL.uop - Just added one or two items to new haven. I have a fresh servUO instance that I would like to load up and just check to see that those changes reflected correctly ingame.

Is this possible right out the bat or am I being a bit doff?

Thanks :)
 
Copy the edited uop file and replace both the server and client side versions, They both need it to see the changes, this is presuming you loaded and edited a standalone set of the UO Files!
 
If you have UO Installed and didn't mod the config file, the server is using the UO Files iirc, I'm working on old knowledge, I am more the scripter around here than the art guy! When I was dabbling in this I would have a folder for editing files, than I would copy those edited files to my UO client which the shard/Server was using and to my players so they could patch their clients!
 
So i have one more issue - apologies.

I must have changed a setting or something on the app. The server loads but when the app loads I can't see the UI anymore - the server however reports that it is connected.

Have tried reinstalling.

Not sure if I messed with a setting that has done this? Error attached.
 

Attachments

  • error.png
    error.png
    36.1 KB · Views: 11
  • xml.png
    xml.png
    35.5 KB · Views: 10
  • server.png
    server.png
    32.5 KB · Views: 10
Last edited:
Check running apps in details of task manager probably you have not fully closed centred server instance process still running. Also don't share server files with client files. So you should make a separate copy of map+statics for centred server.
 
Guys I litterally don't know what I'm doing wrong. The server keep saying that is unable to load the .uop file.
Screenshot 2024-03-25 182730.png
If I run it without a cmd administrator level, i get this: 1711391430996.png
If I run it with a cmd WITH administrator level I get this: 1711391478058.png
In both scenarios, i get an error.

My Client Version is: 7.0.101.2
 
Hank said:
O gönderiye eklediğim alıntıda açıklandığı gibi. UOFiddler'ı kullanmanız gerekir. Bir haritadan diğerine kopyalamak için CentrED+ değil.
UOFiddler'ı kullanmak için yardıma ihtiyacınız varsa ayrı bir ileti dizisi oluşturmalısınız. Bu konu, bildiğim kadarıyla bir haritadan diğerine kopyalayamayan CentrED+ ile ilgili olduğu için.
Click to expand...

I copied it with uofiddler, but does anyone know if it opened without centering?
 
First prefix should be 0,1,2 or other number depending on map number so map 0 is Prefix 0 and not 0x.
Second Flags value depends on file version so which client files are those? Where do you keep map files for centred? Same folder as cedserver.exe or some other path?
 
Hello everyone
I recently decided to create a custom map, but, obviously, it's not a simple thing

The biggest problem currently is this:
WhatsApp Image 2024-05-08 at 01.53.41.jpegThat is, the transitions between water and land generate these orange tiles only where there are curves, while this does not happen in straight sections, what could it be? Could it be because of the "size" of the curve? I read that there should be a 2x2 transition but I don't understand if it refers to this or something else.
I also tried changing the flag, but with poor results

The one I'm currently using will generate fewer problems though.


Other info:
Client version 7.0.102.3
I'm currently using UOLandscaper to create the mul files that i use on Centred+

XML: 
<?xml version="1.0"?>
<CEDConfig Version="6">
  <Language>..\Language\English.ini</Language>
  <Port>2597</Port>
  <Map>
    <Map>\map0.mul</Map>
    <StaIdx>\staidx0.mul</StaIdx>
    <Statics>\statics0.mul</Statics>
    <Width>896</Width>
    <Height>512</Height>
    <Prefix>0</Prefix>
    <Format>0x0000018C</Format>
  </Map>
  <Tiledata>\tiledata.mul</Tiledata>
  <Radarcol>\radarcol.mul</Radarcol>
  <Accounts>
    <Account>
      <Name>***</Name>
      <PasswordHash>***</PasswordHash>
      <AccessLevel>255</AccessLevel>
      <LastPos x="1128" y="1704"/>
      <Regions/>
    </Account>
  </Accounts>
  <Regions/>
</CEDConfig>
 
I believe I was told you have to have 3x3 transition in landscaper can't trans below that. The brown you are seeing is a part of shallow water. It is beneath the static. Deep water doesn't have them. As I have done a lot with transparent water. I know that is not proper shallow. So it has occurred in your painting of the shallows.
 
You must log in or register to reply here.

Active Shards

Donations

Total amount
$0.00
Goal
$1,000.00
View
Back